Mesh shoes are a popular style choice for summertime because they’re light and airy. However, they can also be difficult to clean because of all the tiny holes in the fabric. how to clean mesh shoes with baking soda?

the best way to clean your mesh shoes is to use a gentle cleaning solution and a soft brush.

In this article, we’ll show you how to use baking soda to clean your mesh shoes and get them looking new again!

How To Clean Mesh Shoes With Baking Soda?

There are different ways to clean mesh shoes, but most of them require harsh chemicals that can damage the fabric. Baking soda is a gentle alternative that will clean your mesh shoes without damaging them.

To clean your mesh shoes with baking soda, you’ll need:

1. A soft brush
2. A bowl of water
3. Baking soda

Step 1:

Start by removing excess dirt and dust from the shoes with a brush, for this purpose use a soft brush. First, brush off any dry dirt from the shoes and then wet the shoes with a little water.

Step 2:

Make a paste of baking soda and water in a bowl. The paste should be thick enough to spread on the shoes but not too runny.

Step 3:

Use the brush to apply the baking soda paste to the shoes. Make sure to cover the entire surface of the shoes, including the soles.

Step 4:

Leave the paste on the shoes for about 30 minutes to allow it to work its magic.

Step 5:

After 30 minutes, use the brush to scrub the shoes and remove the baking soda paste. Rinse the shoes with water to remove any baking soda residue.

Step 6:

Dry the shoes completely before wearing them again.

How To Clean Colored Shoes With Baking Soda?

Cleaning colored mesh shoes with baking soda need bit of effort in order to prevent discoloration.

To clean your colored mesh shoes with baking soda, you’ll need:

1. A soft brush
2. A bowl of water
3. Baking soda

Step 1:

Start by removing excess dirt and dust from the shoes with a brush. First , brush off any dry dirt from the shoes and then wet the shoes with a little water.

Step 2:

Make a paste of baking soda and water in a bowl. The paste should be thick enough to spread on the shoes but not too runny.

Step 3:

Use the brush to apply the baking soda paste to the shoes. Make sure to cover the entire surface of the shoes, including the soles.

Step 4:

Leave the paste on the shoes for about 30 minutes to allow it to work its magic.

Step 5:

After 30 minutes, use the brush to scrub the shoes and remove the baking soda paste. Rinse the shoes with water to remove any baking soda residue.

Step 6:

Dry the shoes completely before wearing them again.

Precaution:

• Do not use hot water as it can cause the colors in the shoes to bleed.
• Do not leave the paste on the shoes for more than 30 minutes as it can discolor them.

Conclusion:

To conclude, how to get strain out of mesh shoes? Mesh shoes are a great choice for summertime, but they can be difficult to clean. Baking soda is a gentle alternative that will clean your mesh shoes without damaging them. Follow the steps above to get your mesh shoes looking like new again!

FAQs: