How Do I Clean Timberland Boots? Ultimate Guide (2022)

Timberland shoes are known for their durability and long-lasting wear. However, like all shoes, they will eventually need to be cleaned. Many people ask how do I clean timberland boots?

Cleaning your timberlands is a relatively easy process, and can be done with common household items.

In this post, we’ll outline the steps you need to take to clean your timberland boots. So whether your boots are just a little dirty, or downright disgusting, read on for how to get them looking good as new!

Are Timberland Boots machine-washable or hand-washable?

how do I clean timberland boots?

Timberland boots can be machine-washed; however, I do not recommend them. because of the high-speed water jet found in most machines, it may cause your boots too much damage.

Timberland is made of leather, and it is recommended to only hand-wash your boots in cold water with a gentle detergent.

Following are the few methods if you don’t know how to clean timberland boots.

1. Remove Mud And Dirt From Timberlands

It’s important to note that you should never wash your boots with hot water, as it can cause the leather of your boot to crack. Use cold water only, and stay away from any heat at all costs!

You will need:

  • 1 bucket or sink
  • Harsh detergent (washing-up liquid)
  • A low-cleaning toothbrush
  • A rag
  • 2 sponges or a kitchen towel/cloth
  • Fresh water in a separate bucket

2.  Cleaning Timberlands Using Detergent:

  1. First, fill the sink or bucket with cold water, and add enough cleaning detergent to make it sudsy. You don’t need much soap; you’ll see why later!
  2. Next, place your timberlands in the water carefully – make sure you don’t submerge them completely!
  3. Take your toothbrush and scrub away at any areas of thick accumulated dirt; this includes the tongue of the boot, where mud tends to get trapped inside. You can also use an old rag or sponge, but a toothbrush works best for this particular area of your boots.
  4. Rinse away the soap with clean water – this will remove any excess dirt and grime too!
  5. Using your sponge or cloth, wipe down the rest of your boot (except for the laces, as they can’t get wet). This will remove any excess dirt accumulated during this process.
  6. Make sure not to miss the areas where the stitching has been!
  7. Once your boots are clean, you can now wash off any excess soap using fresh water in another bucket or sink full of cold water. Using a sponge or cloth again, wipe down your boots until they’re rid of the soap.
  8. Give your boots a final rinse in clean water, and let them dry out for a few hours using simple precautons.
  9. If you want to be extra sure that your boots are totally free of soap, you can give the inside of the boot a wipe with a cloth or sponge too – just make sure not to get any water on the label inside the boot, as it contains important information about your boots.
  10. Once your boots are dry, you can polish them up with either wax or leather cream to maintain their original shine. You don’t need much of the product – just a little bit rubbed in with a cloth is all that’s needed!
  11. Sit back and admire your gleaming timberlands!

How to clean timberland boots with vinegar?

Clean the area around the eyelets or lace holes with a toothbrush and soap and water at your sink. This is to ensure no dirt, mud, rocks, etc., get stuck anywhere in these areas during the cleaning process.

You will need:

  • Vinegar
  • Water
  • Spray Bottle
  • ToothBrush
  • Towel


  1. Mix one part white vinegar with two parts water in a spray bottle that has a fine mist setting.
  2. Spray your boots with the vinegar mixture, then wipe them down with a microfiber cloth that is dampened with distilled water.
  3. For more difficult areas or stains on your boots, use a toothbrush to scrub the area before wiping it off with clean water and a dry microfiber towel.
  4. Use a separate clean towel to wipe the area dry.
  5. Let your boots air dry for several hours prior to use.

How To Clean Timberland Suede Boots? 

You can follow the steps below. But before following the given method make sure you have removed extra dirt and dust from your shoes. 

You will need:

  • Mild soap 
  • Cold Water
  • Spray Bottle
  • ToothBrush
  • Commercial Cleaner


  1. Mix a small amount of mild soap in cold water and place it in a spray bottle. Soak a clean, soft toothbrush in soapy water and scrub the suede with the soap to eliminate dirt.
  2. Rinse off any residue with clean, room-temperature water.
  3. Sprinkle the entire boot with commercial cleaner for suede leather. Let stand for five to 10 minutes, then brush lightly with a soft shoe brush to remove grime and dirt particles
  4. Allow your boots to air dry before wearing them. Do not apply heat or use a hairdryer, as this will damage the waterproof qualities of your boots.
  5. If stains remain after cleaning, mix equal parts vinegar and water in a spray bottle and apply to the boot. Allow to stand for five minutes, wipe off with a soft cloth, and air dry.

Which Type Of Detergent Should I Use To Clean Timberland?

For washing your timber boots you need detergents with a high PH value. The PH value indicates the degree of acidity or alkalinity in water. 

If you know what you are doing, it is also possible to use soap that has a neutral ph-value so that it won’t damage your boots.

How Should Timberland Boots Be Dried?

After you’ve washed and dried your boots, make sure to let them air dry for at least 24 hours. 

This will ensure that they are completely dry before wearing them again to prevent any bacteria from growing inside the shoe as well as avoid any possible staining or discoloration due to water trapped within the boot.

Where Can I Get Timberlands That Won’t Get Dirty?

The best way to avoid dirt or stains on your boots is to brush them off with a clean dry cloth before heading indoors. 

Be sure to take off any loose mud stuck to the bottom of your boots when you enter your home so that you can avoid tracking in any grime which will eventually damage your Timberland shoes. 

Avoid getting your boots wet by wearing waterproof ponchos or an umbrella, especially during the winter months when snow and ice can easily damage your boots.

What Should I Do If My Laces Are Dirty?

If you want to maintain the color of your lacing system, make sure to take them out of your Timberlands when you wash them. 

You can replace your laces with new ones or simply clean the original lacing system by washing it in warm water and letting it air dry completely before replacing them back into your boots!

how do I clean timberland boots?


How do I clean timberland boots? Cleaning Timberland boots are not hard at all if you know the right way to do it. As long as you follow the steps above, you should have no difficulties in cleaning your favorite pair of boots!


Q. What household items can I use to clean Timberland boots?

A. You can use vinegar, dish soap, and a toothbrush for tough stains to remove from timberland boots.

Q. How can I clean my Timberlands at home?

A. Follow the above-mentioned steps to remove stains from timberland boots if you don’t know how do I clean timberland boots?

Q. How do you get stains out of Timberland boots?

A. Check the steps above to find out how to clean stains from timberland boots.

Q. Can timberlands be washed?

A. Yes, you can clean timberland suede boots and other types of timberland boots using the above methods.

Leave a Comment